Paradox K07C - EVO;DGP Programming Sections

PAGE 20 EVO/DGP System Programming
EVO/DGP Programming Sections
* Must be enabled through option [4] in section [002] first.
Section [001]: Keypad Partition Assignment
Option OFF ON
[1] Partition 1 NDisabled UEnabled
[2] Partition 2 NDisabled UEnabled
[3] Partition 3 NDisabled UEnabled
[4] Partition 4 NDisabled UEnabled
[5] Partition 5 NDisabled UEnabled
[6] Partition 6 NDisabled UEnabled
[7] Partition 7 NDisabled UEnabled
[8] Partition 8 NDisabled UEnabled
Section [002]: General Options 1
Option OFF ON
[1] Display code entry UDisabled NEnabled
[2] Display exit delay NDisabled UEnabled
[3] Display entry delay NDisabled UEnabled
[4] Confidential mode UDisabled NEnabled
[5] To exit confidential mode * UEnter
Code
NPress key
[6] Exit delay beep NDisabled UEnabled
[7] Keypad input type UTemp.
Sensor
NZone
[8] Keypad tamper UDisabled NEnabled
U= Default Setting