Specifications
Power input Typically 12 to 16 Vdc
Current
consumption
120 mA (at maximum backlight setting)
Number of inputs 1
Temperature
sensors
1 built-in, 1 optional external temperature sensor
(TEMP07)
Locate indication Blue LED flashes
Multibus/Combus
fault indication
Fault indication message will appear on the LCD screen.
Anti-tamper switch Yes (optional)
Display TFT screen (Thin Film Transistor). Under electrostatic-
discharge (ESD) conditions the screen may go blank. To
reset the screen press any key or wait one minute.
Screen size: 9cm (3.5”)
Screen resolution: 320x240
Colors: 64k colors
Compatibility Imperial V32
EVO48/192
DGP-NE96
DGP-848
NOTE:
Imperial systems require BabyWare V1.0.300 and
higher. Refer to the Imperial System Guide.
To Next Page
Loading...
