EVO/DGP System Programming PAGE 15
Confidential Mode
SECTION [002]: OPTIONS [4] AND [5]
WARNING: For UL installations, Confidential Mode must be disabled
(option [4] = OFF)
If Confidential Mode is enabled and actions are not performed on the
Grafica keypad for a period of time, the screen will display the time,
date and all LEDs on the keypad will turn off until either a key is
pressed, or an code # is entered. The period of time in which no
action is performed is defined by the Confidential Mode Timer (see
“Confidential Mode Timer” on page 17).
Grafica will switch from Confidential Mode to Normal Mode when a
key is pressed or a code # (PIN) is entered. In normal mode, Grafica
displays the date, time and the status of the zones for every partition
assigned to the keypad. In addition, the alarm memory, bypassed
zones and troubles will also be displayed.
S
ECTION [002]: OPTION [4]
Option [4] OFF = Normal Mode (default)
Option [4] ON = Confidential Mode
S
ECTION [002]: OPTION [5]
Option [5] OFF = Exit confidential mode by entering an code # (PIN)
(default)
Option [5] ON = Exit confidential mode by pressing any key
NOTE: Section [002] option [5] will work only if option [4] in section
[002] is enabled.
Exit Delay Beep
SECTION [002]: OPTION [6]
The keypad can beep once every second or play a selected tone
during the Exit Delay Timer. During the final 10 seconds only the
beep tone will be heard (at a faster interval) to provide a final warning
before the area is armed.
Option [6] OFF = Exit Delay beep is disabled
Option [6] ON = Exit Delay beep is enabled (default)
Keypad Input Type
SECTION [002]: OPTION [7]
Grafica’s keypad input (see “Keypad Input” on page 9) can be utilized
as a zone or as an input for an optional external temperature sensor
To Next Page
Loading...
Need help?
General
