10 Installation and Operating Instructions
SECTION [001] CARD/CODE OPTIONS
The R885S can function as a reader only, as a
keypad only or as a combined reader and
keypad. Option [3] by default
When a Card/Code option is set, it may
require several seconds for the system to
update the programming. The reader emits a
confirmation beep once the modification is
complete.
SECTION [002] DOOR LOCK CONTROL
The Door Lock Control determines the length of time
the locking device remains unlatched after an
Access Granted. When [0] is programmed, the lock
is unlatched after an Access Granted and remains
unlatched until it receives a second Access Granted
(functions like a key). When [1] to [5] is
programmed, the lock remains unlatched for the
defined time period. Option [2] by default.
Enter Description
[0] Keypad and reader disabled. For
programming only.
[1] Reader only. Present valid card to the
reader for Access Granted.
[2] Keypad only. Enter valid code on the
keypad for Access Granted.
[3] Keypad and reader enabled. A user must
present BOTH a valid card AND enter a
valid code to receive an Access Granted.
To Next Page
Loading...
General