R885S 21
Note: It may take several seconds for the
module to register the command and emit a
confirmation beep.
When the User Codes are reset, it may
require several seconds for the system to
update the programming. The reader emits
a confirmation beep once the modification
is complete.
USER OPERATION
USER ACCESS
Access is granted according to the Card/Code
Option (see page 10) and the Access Granted
Option set (see page 11).
Single Access
Granted
Dual Access
Granted
Reader
Only
1 user: user
presents a valid
card to the
reader.
2 users: each user
presents a valid card
to the reader.
Keypad
Only
1 user: user
enters a valid
User Code on
the keypad and
presses the
[
ENTER] key.
2 users: each user in
turn enters a valid
User Code on the
keypad and presses
the [
ENTER] key.
To Next Page
Loading...
General