22 Installation and Operating Instructions
The second user’s card and/or User Code
must be different from the first.
PANIC ALARM
A panic alarm can be generated by pressing and
holding the [
CLEAR] and [ENTER] keys for 2
seconds. The Panic Alarm will activate the panic
output (see Figure 1 on page 5). Access will not
Reader
and
Keypad
1 user: user
presents a valid
card to the
reader. The
reader emits a
confirmation
beep and the
green Status
LED flashes.
User must enter
a valid User
Code on the
keypad and
press the
[
ENTER] key
within 10
seconds.
2 users: the first
user presents a valid
card to the reader.
The reader emits a
confirmation beep
and the green Status
LED flashes. The first
user must enter a
valid User Code on
the keypad and press
the [
ENTER] key
within 10 seconds.
The reader will emit
a Confirmation Beep
and the red Status
LED flashes slowly.
The second user has
30 seconds to
present a valid card
to the reader and
then enter a valid
User Code.
Single Access
Granted
Dual Access
Granted
To Next Page
Loading...