STEP KEY DESCRIPTION
37. - Select SPAN (holiday duration) header.
38. NEXT First holiday duration is shown with holiday # flashing.
39. NEXT Holiday start is shown with month flashing.
40. - Roll to OCT (October).
41. NEXT Holiday start date is flashing. 01 is the desired date.
42. NEXT Holiday end month is flashing.
43. + Roll to APR (April).
44. NEXT Holiday end date is flashing.
45. - Roll to 30.
46. NEXT HOLIDAY (holiday schedule) is flashing. No schedule is currently
selected (not used).
47. + Select A (holiday schedule A).
48. RUN Programming is complete. The control will do a status update and
then go to the RUN mode.
42
To Next Page
Loading...