STEP KEY DESCRIPTION
27. NEXT Hours are flashing.
28. + Roll hours to 8 AM (PM indicator is not displayed).
29. NEXT Minutes are flashing. 00 is desired value.
30. NEXT SUN is flashing, NO is displayed. Step through the days to select
YES for MON, TUE, WED, THU and FRI.
31. NEXT ON is displayed with the on setpoint flashing.
32. + Roll to 074F.
33. NEXT OFF is displayed with off setpoint flashing. Default value of 072F is
what we want. If another value is desired, use the +/- keys to roll to
that value.
NOTE: Because the resolution is 1.5 F, not all values of F will be
possible.
34. NEXT Sensor event # 02 is shown. Repeat the above steps to select
Sensor 1, Channel 1, 12:00 PM, MON thru FRI, an ON setpoint of
077F and an OFF setpoint of 075F.
35. PROGRAM Advance to HOL (holiday) header.
36. NEXT Displays SPEC (special holiday ) header.
41
To Next Page
Loading...