LCDCMD - BASIC Stamp Command Reference
Page 166 • BASIC Stamp Programming Manual 2.0b • www.parallaxinc.com
LCDCMD 1, FourBitMode 'Set buss to 4-bit mode
LCDCMD 1, TwoLine5x8Font 'Set to 2-line mode with 5x8 font
LCDCMD 1, DisplayOff 'Turn display off
LCDCMD 1, DisplayOn 'Turn display on with blinking cursor
LCDCMD 1, IncCrsr 'Set to auto-increment cursor (no display shift)
LCDCMD 1, ClearDisplay 'Clear the display
RETURN
To Next Page
Loading...