Chapter 2. InspectRx Preventative Maintenance
Guide
This document and the information contained herein is provided on an “As Is” basis and Parata
disclaims all warranties, express or implied, including but not limited to any warranty that the use
of the information herein will not infringe any rights or any implied warranties of merchantability
or fitness for a particular purpose. Parata reserves the right to make changes to the content of this
manual, at any time, without obligation to notify any person or entity of such changes. Those wishing
to reproduce and/or use this text for purposes other than above authorized, are requested to apply in
writing or directly contact:
Parata
106 Roche Dr.
Durham, NC 27703
www.Parata.com
Confidential Property of Parata This material cannot be copied or disclosed to others without the
prior written permission of Parata.
Required Tools
• Metric Allen Wrenches
• Box end Wrench Set (up to 13MM)
• Adjustable Wrench
• InspectRx Preventative Maintenance Parts Kit
• #2 Phillips Screwdriver
Removing the Main Belt
Preparation / installation
To release the belt a number of parts need to be removed. This is done in 10 steps. Detailed
instructions on certain parts can be found elsewhere in this manual.
1.
Remove the infeed cover (with ZiuZ-sticker on the side).
To Next Page
Loading...