Parata Mini User Manual

HPAC Cell and Chute Cleaning
Customer Guide
120-0465 Rev 03
Parata Systems, LLC 2600 Meridian Parkway Durham, NC 27713 www.parata.com
The information in this document is proprietary
and confidential to Parata Systems, LLC. Content
may be changed at any time and without notice.

Parata Mini Specifications

General

Manufacturer	Parata Systems
Function	Medication dispensing
Design	Compact
Connectivity	Ethernet
Type	Automated Dispensing System

Summary

Parata Mini HPAC Cell and Chute Cleaning

Introduction to Cell Cleaning

Introduces the Parata Mini and the necessity of cell and chute cleaning.

Required Cleaning Kit Components

Lists all necessary items included in the Parata In-Pharmacy Cell Cleaning kit.

Estimated Cleaning and Drying Times

Provides estimates for cleaning and drying times for the cell.

Detailed Cell Cleaning Procedure

Prepare the Cell for Cleaning

Details steps for removing the cell and its components before cleaning.

Perform Cell Cleaning

Outlines the process of cleaning the cell using cleaning solution in a sealed bag.

Rinse the Cell

Describes the procedure for rinsing the cell with the rinsing agent.

Air Dry the Cell

Explains how to position the cell for 24-hour air drying.

Complete Cell Drying and Checks

Details final checks and positioning for complete cell drying.

Reassemble the Cleaned Cell

Guides on reinstalling breathers, nozzle cover, foam plug, and splash guard.

Replenish and Calibrate Cell

Covers loading pills, calibration, and assigning drugs to the cleaned cell.

Chute Cleaning and Reassembly

Chute Assembly Parts

Identifies the three main parts of the chute assembly: dispense chute, door, and tube.

Disassemble Chute for Cleaning

Provides step-by-step instructions for taking apart the chute assembly.

Clean and Dry Chute Components

Details the process for cleaning and drying the individual chute parts.

Reassemble the Chute Assembly

Guides on putting the chute assembly back together after cleaning.