InspectRx200 Operator Guide | 1 - InspectRx200 Operator Guide | 6
• Wait for reboot and open the Corrector application
Starting Up, Logging In, and Logging Off
Start Up
The Operator screen is visible after a successful startup with the Control tab active.
Complete the steps below to start up the Operator:
1. Turn on the InspectRx by flipping the main power switch on.
2. Press the ANA button to power up the internal Analyzer PC.
3. Press the OPE button to power up the internal Operator PC.
4. Wait for the machine to boot up. The Operator Application, which is used to control the
InspectRx, will start automatically.
5. Upon successful powering-on of the computer, the Operator main screen will automatically
open with the Login window visible.
Log In Overview and Application Rights Levels
All InspectRx Applications are secured by a log-in functionality. When an application is started, a
log in window will appear. Closing this window will close the application. Users log in with a User
Name and Password. When an application is left unattended for a certain amount of time (default= 15
minutes), the application will automatically log the user out.
Three Log in levels are available for the InspectRx applications. The levels are named “Level One,
Level Two, and Level three” Level Three is the Admin level, with access to settings, managing
references and managing users permissions.
Note: New Users are created within the Manager Application. To Add, Modify or Delete Users,
see the INSPECTRX MANAGER (ADMIN) Training Guide. Reports about user activity can also
be generated in the Manager Application. Tracking data is collected for Checking, Validating, and
Correcting.
Application Rights Table
Table 1.
Application Level One Rights Level Two Rights Level Three Rights
Operator
Tab “View” not present
No access to ZiuZ menu
“Reference Batch” not
present
“Single Reference” button
not present
No Restrictions
To Next Page
Loading...