Customer Guide
HPAC Cell Cleaning
©2015 Parata Systems, LLC page 13 of 40 Parata Technical Assistance Center
120-0465 Rev 03 1-888-PARATA1 (727-2821)
1.14 Clean the adhesive residue off of the cell where you removed the baffle covers,
nozzle splash guard, and the drug label.
Note It is easier to remove the adhesive when the cell is dry than when the cell is
wet.
1.14.a Use the sticky side of transparent tape to pull up any excess adhesive.
Step 1.14.a
1.14.b If necessary, use a plastic tool with a flat edge to scrape excess residue
from the cell.
CAUTION
Do not use any cleaning products or chemicals to remove
the residue, as they may damage the cell
CAUTION
Do not use any sharp or metal objects to scrape residue
from the cell as these will damage the cell.
To Next Page
Loading...