Customer Guide
HPAC Cell Cleaning
©2015 Parata Systems, LLC page 26 of 40 Parata Technical Assistance Center
120-0465 Rev 03 1-888-PARATA1 (727-2821)
6.6 Insert the folded cloth into the cell and position it so that it is under the baffle (A)
and as far up toward the nozzle throat (B) as possible.
Step 6.6 Position of the drying cloth in a standard cell (top) and in a super cell (bottom)
6.7 Verify that the stem cap has been removed from the cell, as directed in step
3.12.
CAUTION
If left on, the stem cap could damage the coupler on the
manifold in the unit.
To Next Page
Loading...