Customer Guide
HPAC Cell Cleaning
©2015 Parata Systems, LLC page 9 of 40 Parata Technical Assistance Center
120-0465 Rev 03 1-888-PARATA1 (727-2821)
1.9.c Push the cover firmly against the nozzle so that both sides of the
cover snap into place over the tabs on the cell nozzle.
Step 1.9.c
1.10 If it is installed, remove the foam plug next to the black height setting knob on
the bottom of the cell:
Step 1.10
1.10.a Turn the white width knob on the side of the cell clockwise to adjust
the setting to A.25.
To Next Page
Loading...