Parker GT Series User Manual

10 Gemini GT Hardware Installation Guide
Compatible Compumotor Products
GT-nn Stepper 6K or other Compumotor indexer
GV-nnn Servo ±10V mode: 6K or other Compumotor controller
Step/Direction mode: 6K or other Compumotor indexer
Software Motion Planner
Pocket Motion Planner (version 1.2 or higher)
Note: Gemini drives are not compatible with ASCII communication
programs such as Motion Architect or X Language software.
Cables See list in Appendix A Specifications .
Motors See information in the separate Gemini Motor Reference Manual .
User Guides
The following items ship with the drive:
Gemini Quick Start Guide
Gemini Hardware Installation Guide
Gemini Programmer's Reference
Gemini Motor Reference Manual
Motion Planner CD-ROM
You can also order the drive only, with none of the above items. Specify
the -NK option (“No Kit”).
Motor Information
Information about Compumotor motors is in the separate Gemini Motor Reference
Manual.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Parker GT Series Specifications

General

Horsepower	0.5 to 15 HP
Feedback	Tachometer
Protection Rating	IP20
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Operating Modes	Speed Control, Torque Control