48
Gemini GT Hardware Installation Guide
Motion Problems
If problems occur during motion, check these possible causes:
• Motor Sizing (ensure that the motor has enough torque to perform the move)
• Excessive Acceleration or Deceleration
• Excessive Velocity
Electrical Noise
Electrical noise on input or output lines can cause stop or kill inputs to activate
unexpectedly. See Appendix C: Regulatory Compliance for installation guidelines
on reducing electrical noise.
Software/Motion Program Problems
Check to see that your motion programs are functioning properly, and are not
causing unexpected problems.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
