4
Gemini GT Hardware Installation Guide
Product Type : Gemini Family of Drives, GTn and GVn
Including, but not limited to :
GT(6)-L5, GT(6)-L8, GT(6)-U5, GT(6)-U8
GV(6)-L3, GV(6)-U3, GV(6)-U6, GV(6)-U12
When installed in accordance with this installation guide, the above products have
been demonstrated to be in compliance with the requirements of directives
• 89/336/EEC Electromagnetic Compatibility Directive
as amended by Directive 92/31/EEC
These products are intended for use in Commercial, Light Industrial and Industrial
Environments as defined in the relevant EMC standards.
These products are compliant with the Low Voltage Directive.
• 73/23/EEC Low Voltage Directive
• 93/68/EEC CE Marking Directive
Symbols:
Protective Earth Connection
Earth (Ground) Terminal
Shield, Frame, or Chassis Terminal
Caution, Risk of Electrical Shock
Caution, Refer to Accompanying Documentation
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
