Maintenance and service LCB Compact Linear Actuator
18 192-510014 N04 March 2010
We recommend to drive or to push the sliding carriage to the deflection
station for changing the sliding blocks.
Remove/mount covers:
Unscrew only the two upper screws of the cover at the deflection station (unscrew
for about 1 – 3 mm, not more as they do not only fix the cover but also the
deflection station itself).
Remove cover in upwards direction
Unscrew the two fixing screws at all four sliding blocks entirely and remove sliding
blocks.
Mount new sliding blocks in reverse order. Tighten screws only slightly. Move
sliding carriage forwards and backwards several times (so that the sliding blocks
are aligned) and then tighten screws.
Check sliding carriage again for free movement.
To Next Page
Loading...
