Parker LCB Series - T-Nuts and Bolts

Parker EME
Accessories
192-510014 N04 March 2010 41
6.4 T-Nuts and Bolts
The T-nuts and bolts are used to attach external components to the T-grooves of
the profile.
Nuts
E
E1
K
GA
D
T slot bolts and nuts
DIN 562
K
E
D
DIN 934
K
D
E
DIN 787
L
K
D
E1
E
Type Designation D I I1 K GA L Art. No.
LCB040 T-Nut M4 8 11.5 4 4 -- 127-004020
LCB040 T-Nut M5 8 11.5 4 4 -- 127-004021
LCB040 Square nuts* DIN 562-M4 M4 7 -- 2.2 -- -- 135-700001
LCB040 Square nuts* DIN 562-M5 M5 8 -- 2.7 -- -- 135-700003
LCB040 Hexagon nut* DIN 934-M4 M4 7 -- 2.9 -- -- 135-700600
LCB040 Hexagon nut* DIN 934-M5 M5 8 -- 3.7 -- -- 135-700700
LCB060 T-bolt DIN787 M8 x 8 x 25 M8 13 13 6 -- 25 131-700001
LCB060 T-bolt DIN787 M8 x 8 x 32 M8 13 13 6 -- 32 131-700002
LCB060 T-bolt DIN787 M8 x 8 x 40 M8 13 13 6 -- 40 131-700003
LCB060 T-Nut M4 13.7 22 7 7.5 -- 127-006015
LCB060 T-Nut M5 13.7 22 7 7.5 -- 127-006016
LCB060 T-Nut M6 13.8 23 7.3 5.5 -- 400-000033
LCB060 T-Nut M8 13.8 23 7.3 7.5 -- 400-000034
* Square and hexagon nuts should only be used for lightly-loaded attachments