Parker P1F - Seal Kits

Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatics
29
For inventory, lead times, and kit
lookup, visit www.pdnplu.com
Tie Rod and Prole Pneumatic Cylinders
P1F Series
Catalog 0980
Seal Kits
Bore
size
mm
Plastic
piston
T1 Nm
Al
piston
T1 Nm
AF
mm
T2
Nm
AF
mm
T3
Nm
32 4.5 15 6 11 6 4.5
40 11 30 8 11 6 4.5
50 20 40 10 18 8 9.5
63 20 40 10 18 8 9.5
80 40 120 14 29 6 19
100 120 120 14 29 6 19
125 120 120 14 70 8 40
Complete seal kits consisting of:
• 2 piston seals
• 2 cushioning seals
• 1 wiper / piston rod seal
• 2 o-rings
Bore
size
mm
Standard
temperature
1)
High
temperature
1)
Low
temperature
1)
Metallic
scraper
1) 2)
FKM Wiper
seal
1)
With dyn.
rod lock
1)
32
P1F-6032RN P1F-6032RF P1F-6032RL P1F-6032RQ P1F-6032RV P1F-6032RNL
40
P1F-6040RN P1F-6040RF P1F-6040RL P1F-6040RQ P1F-6040RV P1F-6040RNL
50
P1F-6050RN P1F-6050RF P1F-6050RL P1F-6050RQ P1F-6050RV P1F-6050RNL
63
P1F-6063RN P1F-6063RF P1F-6063RL P1F-6063RQ P1F-6063RV P1F-6063RNL
80
P1F-6080RN P1F-6080RF P1F-6080RL P1F-6080RQ P1F-6080RV P1F-6080RNL
100
P1F-6100RN P1F-6100RF P1F-6100RL P1F-6100RQ P1F-6100RV P1F-6100RNL
125
P1F-6125RN P1F-6125RF P1F-6125RL P1F-6125RQ P1F-6125RV P1F-6125RNL
1)
for through piston rod, add K at the end, ie P1F-6032RNK
2)
-30 to +80°C
Grease Type
Type Part number
Standard 30 g
9127394541
High temperature 30 g
9127394521
Low temperature 30 g
9127394541
= Included in seal kit Lubricated with grease
= Socket head
across flats
Locking fluid
= Tightening torque
T1
T2
T2
T3
Loctite 270 or Loctite
2701 locking fluid must
be used
(Revised 02-19-19)
www.comoso.com