Parker PSE 180 - Control (120-180); Control Panel; Symbols; Parameter Settings

English
5/20
PSE 120-350
5 Control (120-180)
5.1 Control panel
UP button: press to increase the value of a selected editable parameter.
PRESSED FOR 3s START MANUAL CONDENSATE DRAIN
DOWN button: press to decrease the value of a selected editable parameter.
esc
ESC button : to exit without saving; returns to the previous level;
PRESSED FOR 5s. ALARM RESET.
set
SET button : to exit and saving/ confi rm the value; go to the next level; enter on Set Menu;
PRESSED FOR 5s. START DRYER.
esc
set
: press together at the same time to enter on the parameters of the program.
5.2 Symbol
Symbol Symbol status Function Symbol Symbol status Function
k
Lit up compressor ON
illuminated
Dryer ON
Compressor OFF
Off compressor OFF
Lit up dryer ON
illuminated
Maintenance
Flashing dryer OFF
!
Lit up Alarm present
°C
°F
illuminated
gradeFlashing Warning present
Off No alarm present
q
Lit up Condensate drain ON
Bar
PSI
illuminated
pressure
Off Condensate drain OFF
5.3 Parameter settings
Temperature measurement unit
How to set the temperature measurement unit.
1. Press
set
and
esc
together at the same time to enter general menu “PAr” .
2. Press
set
to fi nd menu “ CF9“ .
3. Press
set
to enter .
4. Use the arrows
or to fi nd the menu “ A1“.
5. Press
set
to choose: ON = Fahrenheit (PSI) / OFF = Celsius(bar).
6. Press
set
to confi rm.
7. Press
esc
to exit.
PAr
esc
set
Y
Y
set
Y
CF9
esc
Y
set
Y
---
esc
Y
set
Y
OFF
esc
Y
Y
Y
On
A1
Y
Y