Parker PSE 180 - Default Parameter; Control Touch (220-350); Control Panel Touch

English
10/20
PSE 120-350
5.12 Software version
1. Press
set
and
esc
together at the same time to enter general menu “PAr” .
2. Press
set
to enter on menu “ CF9“.
3. Use the arrows
or to fi nd parameter “ UEr “.
4. Press
set
to see the software version.
5.13 Default parameter
1. Press
set
and
esc
together at the same time to enter general menu “PAr” .
2. Press
set
to enter on menu “ CF9“.
3. Use the arrows
or to fi nd parameter “ dEF “.
4. Press
set
to enter.
5. Change OFF to ON and press
set
to make the default.
6 Control Touch (220-350)
6.1 Control panel “Touch”
c
Symbol
Status
symbol
Function Symbol
Status
symbol
Function
Green Dryer ON
Present
Present when the dryer
ON, compressor OFF and
without alarm (cycling)
Red Dryer OFF
-
Touch to enter on information
menu
Present
Present when the fan
is ON
Red Alarm present
Present
Present when the
compressor is ON.
Yellow Warning present
Absent No alarm/warning present
-
Touch to manually
activate the drain
Present
Present when the drain
is ON
- Date/Time -
Continuos
Cycling
3.0
- Dew point temperature
Remote
Local
Remote = remote ON
Local = remote OFF