Parker PSE 180 - Alarm History; Setting Clock;Date

English
9/20
PSE 120-350
5.10 Alarm history
In an alarm/warning situation, to see the current and previous alarms occurred, follow the procedure
below:
1. Press
set
to enter menu “ HiSt“.
2. Press
set
to enter into the parameters :
Menu Code Description
HiSt
HiSP Alarm position
HiSC Alarm code
HiSd Alarm date (if clock option is present)
HiSt Alarm hour (if clock option is present)
HiS1/2. value sensor
set
HiSt
Y
set
Y
HiSP
esc
Y
Y
Y
Y
HiSd
Y
HiSC
HiSt
HiS1
5.11 Setting clock/date
1. Press “ ” “ ”, together at the same time to enter menu “FrEE”.
2. Press “
set
” to enter menu “Ai”.
3. Press “
” to enter menu “CL”.
4. Press “
set
” to enter and visualize parameter “HOUr”.
5. Press “
set
” until the screen fl ashes “HOUr”.
6. Select the fl ashing parameter “HOUr” / “dAtE” / “ 4EAr” using “
” and press “
set
” to
enter.
7. Change the fl ashing value using “
”and “ ” (up and down) and press “
set
” to confi rm.
8. Press “
esc
” to return to the menu “FrEE”.
9. Press “
” “ ” together at the same time to exit.
Y
set
dr4
Y
Y
FrEE
Y
Ai
Y
CL
set
Y
HOUr
4EAr
Y
Y
set
Y
set
Y
01.09
set
Y
2015
17.15
set
Y
Y
FrEE
HOUr
dAtE
set
Y
5 sec.
18.20
esc
Y
Y
Y
! The memory of the “clock / date” has a maximum duration of three days, so if the controller is
left without power for more than three days, the data set hour / month / year are lost.
Adjust the clock at the start up of the machine, and whenever necessary.