Parker Sentinel User Manual

11
| User’s Manual
Sentinel
™
4.3 Starting
4.3.1 Initial Start-Up
1. Sentinel is shipped with the breakers in the off position and
must be turned on to operate.
2. NEMA L16-30P anged inlet is standard on all units. Cord set
(PN 943238) is available to order through Parker.
3. Power the system on.
4. If the “Phase Fail Alarm” is shown on the display, change the
phase switch position. Press OK, F2.
5. To set the language and to set the date & time, press the menu
button, located in the lower right hand corner of the IQAN.
Languages can be selected through the main set-up screen.
To choose language from the main screen choose preferences,
then F3 for languages.
6. English or Metric units can be selected see 4.6 Adjust Groups.
4.3.2 Starting
1. Power the system on.
2. If the “Phase Fail Alarm” is shown on the display, change the
phase switch position. Press OK, F2.
If oil remains in the system a message will be displayed reminding
the user to drain the oil before operating.
3
4
4
5
1
2
2

Parker Sentinel Specifications

General

Filtration Technology	Reverse Osmosis
Storage Tank Capacity	3.2 gallons
Operating Temperature	40-100°F
Daily Production	50 gallons
Warranty	1 year limited