Parker V12 Series User Manual

Service/Spare Parts Manual
Series V12
MSG30-5506-M1/UK
4
Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
4
Parker Hannin
PumpandMotorDivision
Trollhättan,Sweden
ServiceManual
Series V12
HY30-5506-M1/UK
Assembling, shaft package
1.Pressdownthebigtapperedrollerbearing
andtheinnerringfortherollerbearingintwo
steps.Note!OnV12-060thereisadistance
betweenthebearings.
2.Pressdowntherollerbearingwiththetext
upwardsintotheangeandassembleiton
theshaftpackage.
3.Assemblethebearingringwiththetext
downwards.
4.Assembletheshim.
5.Assembletheretainingring.Makesure
itisallthewayintothegroove.Checkthe
pre-loadofthebearings,nottotightandno
back-lash.
6.AssembletheO-ring.
4
Parker Hannin
PumpandMotorDivision
Trollhättan,Sweden
ServiceManual
Series V12
HY30-5506-M1/UK
Assembling, shaft package
1.Pressdownthebigtapperedrollerbearing
andtheinnerringfortherollerbearingintwo
steps.Note!OnV12-060thereisadistance
betweenthebearings.
2.Pressdowntherollerbearingwiththetext
upwardsintotheangeandassembleiton
theshaftpackage.
3.Assemblethebearingringwiththetext
downwards.
4.Assembletheshim.
5.Assembletheretainingring.Makesure
itisallthewayintothegroove.Checkthe
pre-loadofthebearings,nottotightandno
back-lash.
6.AssembletheO-ring.
Assembling, shaft package
1. Press down the big tappered roller bearing and the
inner ring for the roller bearing in two steps.
Note: On V12-060 there is a distance between the be-
arings.
2. Press down the roller bearing with the text upwards
into the flange and assemble it on the shaft package.
3. Assemble the bearing ring with the text downwards. 4. Assemble the shim.
Assembling, shaft package
4
Parker Hannin
PumpandMotorDivision
Trollhättan,Sweden
ServiceManual
Series V12
HY30-5506-M1/UK
Assembling, shaft package
1.Pressdownthebigtapperedrollerbearing
andtheinnerringfortherollerbearingintwo
steps.Note!OnV12-060thereisadistance
betweenthebearings.
2.Pressdowntherollerbearingwiththetext
upwardsintotheangeandassembleiton
theshaftpackage.
3.Assemblethebearingringwiththetext
downwards.
4.Assembletheshim.
5.Assembletheretainingring.Makesure
itisallthewayintothegroove.Checkthe
pre-loadofthebearings,nottotightandno
back-lash.
6.AssembletheO-ring.
4
Parker Hannin
PumpandMotorDivision
Trollhättan,Sweden
ServiceManual
Series V12
HY30-5506-M1/UK
Assembling, shaft package
1.Pressdownthebigtapperedrollerbearing
andtheinnerringfortherollerbearingintwo
steps.Note!OnV12-060thereisadistance
betweenthebearings.
2.Pressdowntherollerbearingwiththetext
upwardsintotheangeandassembleiton
theshaftpackage.
3.Assemblethebearingringwiththetext
downwards.
4.Assembletheshim.
5.Assembletheretainingring.Makesure
itisallthewayintothegroove.Checkthe
pre-loadofthebearings,nottotightandno
back-lash.
6.AssembletheO-ring.
5. Assemble the retaining ring. Make sure it is all the
way into the groove. Check the pre-load of the bea-
rings, not to tight and no back-lash.
6. Assemble the O-ring.
4
Parker Hannin
PumpandMotorDivision
Trollhättan,Sweden
ServiceManual
Series V12
HY30-5506-M1/UK
Assembling, shaft package
1.Pressdownthebigtapperedrollerbearing
andtheinnerringfortherollerbearingintwo
steps.Note!OnV12-060thereisadistance
betweenthebearings.
2.Pressdowntherollerbearingwiththetext
upwardsintotheangeandassembleiton
theshaftpackage.
3.Assemblethebearingringwiththetext
downwards.
4.Assembletheshim.
5.Assembletheretainingring.Makesure
itisallthewayintothegroove.Checkthe
pre-loadofthebearings,nottotightandno
back-lash.
6.AssembletheO-ring.
4
Parker Hannin
PumpandMotorDivision
Trollhättan,Sweden
ServiceManual
Series V12
HY30-5506-M1/UK
Assembling, shaft package
1.Pressdownthebigtapperedrollerbearing
andtheinnerringfortherollerbearingintwo
steps.Note!OnV12-060thereisadistance
betweenthebearings.
2.Pressdowntherollerbearingwiththetext
upwardsintotheangeandassembleiton
theshaftpackage.
3.Assemblethebearingringwiththetext
downwards.
4.Assembletheshim.
5.Assembletheretainingring.Makesure
itisallthewayintothegroove.Checkthe
pre-loadofthebearings,nottotightandno
back-lash.
6.AssembletheO-ring.

Parker V12 Series Specifications

General

Brand	Parker
Model	V12 Series
Category	Engine
Language	English