11
5.0 PRODUCT INSTALLATION
There are two mounting options available for
installation:
1. Windscreen suction mount
2. 3M adhesive mount
5.1 WINDSCREEN SUCTION MOUNT
• Insert the magnetic mount holder at the back of
the ClearView 7.
• Clean the windscreen area where the suction
mount is to be mounted.
• Unlock the mount.
• Press the suction mount on the windscreen and
lock it.
Figure: 1
1. Attach the two pieces of the mount together
and lock into place.
2. Adjust the angle of the mount.
3. Clean the windscreen area where the suction
mount is to be mounted.
4. Pull the suction cup lever up to release suction.
5. Press the suction mount on the windscreen and
lock it by pressing the suction cup lever down
until it snaps into place.
6. Snap the ClearView 7 onto the magnetic
mount holder.
To Next Page
Loading...
