32
GB MT
Care and Maintenance ...............46
Cleaning the Equipment ................. 46
Changing the Reel ......................... 47
Changing blades ........................... 47
Removing/mounting the protective
cover extension ....................................48
Cleaning the Air Filter ................... 48
Changing / Adjusting the Spark Plug 48
Sharpening the ThreadCutter .......... 49
Changing the Fuel Filter ................. 49
Winding up the spool ................... 49
Lubricating the gears ...................... 49
Adjusting the Carburettor ................ 50
Removing blockages ...................... 50
Checking the coupling ................... 50
Maintenance Intervals .................... 50
Storage ......................................51
General Storage Instructions ........... 51
Storage During Working Breaks ....... 51
Transport ...................................51
Disposal / Environmental
Protection ..................................51
Spare Parts/Accessories ............. 52
Guarantee .................................53
Repair Service ............................54
Importer ....................................54
Troubleshooting .........................55
Content
Introduction ...............................32
Intended Use ..............................33
General Description ....................33
Delivery Contents .......................... 33
Functional Description .................... 33
Summary ...................................... 34
Safety Functions ............................ 34
Technical Specications .............. 35
Safety Information ..................... 35
Symbols in the Instructions .............. 35
Symbols on the Equipment .............. 36
General Safety Information ............. 37
Additional Safety Regulations .......... 39
Protective measures against
kickbacks ..................................... 41
Assembly ...................................41
Installing the protective cover ..........41
Fitting the Two-Part Tube ................. 41
Mounting the multi-functional
handlebar .................................... 41
Mount cutting tool .......................... 42
Initial Operation .........................42
Filling with Fuel ............................. 42
Putting on the shoulder strap .......... 43
Starting the Engine ........................ 43
Operation ..................................44
Working Notes ............................. 44
Adjusting the carrying harness eyelet/
balancing out the device ................ 45
Working using the threadspool ....... 45
Extending the cutting thread ............ 45
Working using the 3- or 4-toothed
blade ........................................... 46
If the Equipment Vibrates ................ 46
Translation of the original
EC declaration of conformity ....417
Exploded Drawing ........... 432/433
Introduction
Congratulations on the purchase of your new device. With it, you have chosen a high
quality product. During production, this equipment has been checked for quality and sub-
jected to a nal inspection. The functionality of your equipment is therefore guaranteed.