52
GB MT
Take the equipment, accessories and
packaging for environmentally friendly
recycling. Machinery does not belong in
domestic waste.
Drain the petrol tank carefully and take your
equipment to a recycling point. The plastic
and metal components used can be separat-
ed by type and therefore recycled. We will
dispose of the defective equipment you send
in, free of charge. Ask your Service-Center
about this.
Directive 2012/19/EU on waste electrical
and electronic equipment: Consumers are
legally obliged to recycle electrical and
electronic equipment in an environmentally
sound manner at the end of its life. In this
way, environmentally friendly and resource-
saving recycling is ensured.
Depending on implementation in national
law, you may have the following options:
• Return to a shop,
• Hand over to an ofcial collection point,
• Return to the manufacturer/distributor.
This does not affect accessories enclosed
with the old devices or tools without any
electrical components.
Spare Parts/Accessories
Spare parts and accessories can be obtained at
www.grizzlytools.shop
If you have issues ordering, please use the contact form.If you have any other questions,
contact the ”Service-Center” (see page 54).
Position Position Description Order No.
instruction exploded
manual drawing
13,14 I:35-39 Protective cover set (incl. line cutter) 91106200
16 I:40 Thread reel 13800236
29+31 I:41 3-toothed blade + Transport protection 13800233
30+32 4-toothed blade + Transport protection 13800231
46 II:39 Air lter 91106208
47 II:32 Spark plug 91106204
48 Fuel lter 91106217
Alternatively, a replacement thread spool (AutoCut 25-2 from Stihl) can be used.
You can also purchase a 2.4 mm-thick, 6 m-long nylon thread in specialist shops and
wind this yourself onto the thread spool (see the section on “Winding up the spool”).
To Next Page
Loading...
