Parkside PBS 2 D4 - General Safety Guidance; General Safety Information

36
GB MT
Read the instruction manual carefully
before using the device.
Wear gloves.
Information signs with information
for better handling of the equipment.
Symbols on the Equipment
On the equipment, there are information
symbols. These convey important informa-
tion about the product or information about
its use.
• Caution: Special safety measures are
required when handing the equipment!
• The entire operating instructions must
be read and understood before use.
Non-observance of the operating in-
structions may be fatal!
Attention!
Read the operating instructions
carefully before using the equip-
ment.
Wear eye protection.
Wear head protection.
Wear ear protection.
Wear protective gloves.
Risk of injury from cuts.
Wear non-slip safety shoes with
rm soles.
Maintain a safety
distance of min. 15
m from others.
Danger from parts being thrown
out! Keep away from other
people.
Caution! Hot surfaces
– risk of burns!
Attention! Kickback - be aware
that you may experience kick-
back while working with the
machine.
Do not use any circu-
lar- or multi-toothed
saw blades!
Risk of injury.
For use with a spool
For use with 3/4-tooth blade
Direction of travel of spool/the
3/4-tooth blade
Specication of the guaranteed
sound power level L
WA
in dB.
Mix ratio 40:1,
Use ONLY fuel mix
Open ames, re, open
ignition sources and smoking are prohibited.
Lubrication opening on the gearbox
housing
Use ONLY
fuel mix