GB/IE/NI/CY/MT
15
z Troubleshooting
If the glow wire hard foam cutter
1
does not work, check the following:
Faults Cause Corrective action
The glow wire
3
does
not become hot.
Power supply interrupted Check the residual current protection switch
of your mains socket and use another socket
to make sure that the glow wire hard foam
cutter
1
is being properly supplied with
power.
Cable breakage Please contact our service point.
Glow wire
3
broken/
burnt through
Replace the glow wire
3
, as described in
the “Replacing the glow wire” section.
z Storage
Always store the device folded.
To do this, dismantle the device following the instructions for setting up in reverse order.
Keep the device clean and dry and out of the reach of children.
z Information about recycling and disposal
DO NOT DISPOSE OF ELECTRICAL TOOLS IN HOUSEHOLD WASTE!
DON’T THROW AWAY – RECYCLE!
According to European Directive 2012/19/EU, used electrical devices must be collected separately
for environmentally compatible recycling or recovery. The symbol of the crossed out dustbin means that
this device must not be disposed of in household waste at the end of its service life. The device must be
handed in at established collection points, recycling centres or waste management depots.
The disposal of defective devices which you have sent in will be carried out free of charge. In addition,
distributors of electrical and electronic equipment as well as food distributors are obliged to accept
returned waste. Lidl provides you with return options directly in its branches and shops. Return and
disposal is free of charge for you. When buying a new device you have the right to return an equivalent
old device at no charge. In addition you have the option, regardless of whether you are buying a new
device, to hand in (up to three) old devices at no charge, as long as the device is no larger than 25 cm
in any dimension.
Before returning the device please delete all personal information.
Before returning, please remove batteries or rechargeable battery packs which are not enclosed by the
old device, as well as bulbs, which can be removed without destroying the product and take these to a
separate collection point.
Batteries containing harmful substances are labelled with the adjacent symbol, which indicates
the prohibition on disposal in household waste. The abbreviations for the relevant heavy metals
are: Cd = cadmium, Hg = mercury, Pb = lead.
Take used batteries to a waste management company in your city or community or return them to your
dealer. This satisfies your legal obligations while also making an important contribution to protecting the
environment.
Please note the marking on the different packaging materials and separate them as necessary.
The packaging materials are marked with abbreviations (a) and digits (b) with the following
definitions: 1–7: Plastics, 20–22: Paper and cardboard, 80–98: Composite materials.
To Next Page
Loading...
