8
GB/IE/NI/CY/MT
z Technical Specifications
Model: PGDH A2
Supply voltage: 220–240 V ~ 50 Hz
Transformer power: 200 W
Transformer output voltage: 36 V ~ / 5,6 A
Appliance class of the transformer: II (double insulated)
Maximum cutting depth: 330 mm
Maximum cutting length: 1370 mm
Diameter of glow wire: 0.5 mm
Max. temperature of the glow wire: 360 °C
Mains cable length 3 m
PLEASE NOTE: Changes to technical and visual aspects of the product may be made as part of
future developments without notice. Accordingly, no warranty is offered for the physical dimensions,
information and specifications in these operating instructions. The operating instructions cannot therefore
be used as the basis for asserting a legal claim.
z Safety instructions
PLEASE READ THROUGH THE INSTRUCTION MANUAL
CAREFULLY BEFORE USE. THESE FORM PART OF THE PRODUCT
AND MUST BE AVAILABLE AT ALL TIMES!
WARNING! Risk of serious injury or death for children and
infants! Never leave children unsupervised near packaging material.
There is a risk of suffocation.
Before starting work, familiarise yourself with all operating elements,
in particular with the functions and mechanisms. If necessary ask
a professional. Read and follow the operating instructions for the
device. This section covers the basic safety regulations applicable
when working with the device.
ATTENTION!
The device must only be operated when wearing
the appropriate work clothes.
The device must only be operated when wearing protective gloves.
The cutting wire is under a high level of spring tension. If, during
operation, the wire should break, then there may be flying sparks.
To Next Page
Loading...
