38
Interrupting the operation
You can insert the trigger gun (6) with
lance and nozzle into the holder (9) for
the trigger gun.
1. Release the switch lever (24) on
the trigger gun (6).
2. If you put down the trigger gun:
Lock the switch lever using the
child safety lock (25) (seen from
behind).
The switch lever is locked .
You can pull the switch lever
.
WARNING! Risk of injury due to
pressure jet! Lock the switch lever
every time you take a break.
3. When taking longer breaks: Move
the On/Off switch (4) to the posi-
tion “0” (OFF).
Bleeding
Bleeding the supply hose
1. Close the tap.
2. Remove the supply hose from the
device.
3. For more, see Establishing a water
supply, p.34
Bleeding the device
1. Move the On/Off switch (4) to the
position “I” (ON).
2. Wait until pressure has built up
and the motor stops.
3. Move the On/Off switch (4) to the
position “0” (OFF).
4. Press the switch lever (24) on the
trigger gun (6) until the pressure
has been released.
5. Repeat these steps several times
until there is no more air in the
device.
Ending the operation
1. After working with cleaning agents:
• Empty the cleaning agent tank
(17).
• Rinse the device with clear wa-
ter until the lines are free of
cleaning agent.
2. Release the switch lever (24).
3. Move the On/Off switch (4) to the
position “0” (OFF).
4. Close the tap.
5. Press the switch lever (24) on the
trigger gun (6) until the pressure
has been released.
6. Pull out the plug. Wind the mains
connection cable (15) on the hold-
er (14).
7. Disconnect the device from the
water supply.
Transport
How to prepare the device for safe
rolling.
• Switch off the device and discon-
nect the plug from the power out-
let. Make sure that all moving parts
have come to a complete stop.
• Roll the high-pressure hose (11)
around the hose reel (12), and wrap
the power cord (15) around the
holder (14).
• Pull out the U-handle.
Ask a second person to help you if
you wish to carry the device.
Cleaning,
maintenance and
storage
WARNING! Electric shock! Risk
of injury due to unintentional start-
up. Protect yourself when perform-
ing maintenance or cleaning work.
Switch off the device and disconnect
the mains plug from the socket.
You should have any repair and main-
tenance work that is not described in
To Next Page
Loading...
