40
Troubleshooting
The following table will assist you in fixing faults:
Problem Possible cause Error correction
On/Off switch (4) turned
off
Check the position of the
On/Off switch
No mains power supply Check the socket, mains
connection cable, plug
and fuse and have them
repaired by a qualified
electrician if necessary.
Machine does not start
Incorrect voltage supply Check whether the elec-
trical system matches the
information on the type
plate
Turn the device on and
press the switch lever
(24).
Device does not convey
water
Air locks in the pressure
washer
Bleeding, p.38
Air locks in the pressure
washer
Bleeding, p.38No pressure in device
Pressure loss in line Check the water supply
To Next Page
Loading...
