36
Select the attachment
Standard vario-nozzle (22)
The tip can be rotated.
Control elements
• Vario fan jet (Direction of rotation
as seen from behind)
Wide fan jet
Low pressure for
cleaning agent
The higher the pres-
sure, the less clean-
ing agent is sucked in
Narrow fan jet
High pressure
Turbo dirt blaster (29)
The rotating water jet is suit-
able for working with low water
consumption.
Rotating washing brush (10)
• The rotating washing brush is not
generally suitable for sensitive and
painted surfaces (e.g. car paint).
• Do not apply any pressure to the
rotating washing brush. The clean-
ing function is produced by the ro-
tational movement and the flow of
water.
• The rotating washing brush works
in low-pressure operation. The
cleaning agent is automatically
sucked in.
Adjusting the rotating washing
brush
1. Loosen the screw on the articu-
lated joint (27).
2. Adjust the angle of the rotating
washing brush (10).
3. Tighten the screw on the articu-
lated joint (27).
Fitting and removing
attachments
Fitting the nozzle
1. Fit the lance (1) on the trigger gun
(6) (Bayonet locking device: plug
and turn).
2. Fit the attachment on the lance (1).
The attachment clicks into place.
Removing the nozzle
1. Press and hold the release button
(28) on the front end of the lance
(1)
2. Pull the attachment off the lance
(1).
3. Remove the lance (1) from the
trigger gun (6) (Bayonet locking
device: push, turn and pull).
Fit the rotating washing brush (10)
1. Remove the lance (1) from the
trigger gun (6) (Bayonet locking
device: push, turn and pull).
2. Mount the attachment on the
trigger gun (6) (Bayonet locking
device: plug and turn).
Remove the rotating washing brush
(10)
1. Remove the attachment from the
trigger gun (6) (Bayonet locking
device: push, turn and pull).
Operation
Cleaning using cleaning
agent
Requirements for the cleaning
agent
• This device has been designed to
be used with a neutral cleaning
agent based on biodegradable an-
ionic surfactants.
• Use of other cleaning agents or
chemicals can negatively impact
the safety of the device and can