Parkside PHD 170 D2 - Translation of the Original EU Declaration of Conformity

GB
MT
45
Translation of the original EU declaration of
conformity
Product: Pressure Washer
Model: PHD 170 D2
Serial number: 000001–257000
The object of the declaration described above is in conformity with the relevant
Union harmonisation legislation:
2006/42/EC • 2014/30/EU • 2000/14/EC &2005/88/EC
• 2011/65/EU &(EU)2015/863
The object of the declaration described above is in conformity with Directive
2011/65/EU of the European Parliament and of the Council of 8 June 2011 on
the restriction of the use of certain hazardous substances in electrical and elec-
tronic equipment.
To ensure conformity, the following harmonised standards and national stand-
ards and regulations have been applied:
EN 60335-1:2012/A15:2021 •EN 60335-2-79:2012 •EN62233:2008
EN IEC 55014-1:2021 •EN IEC 55014-2:2021 •EN IEC 63000:2018
ENIEC61000‑3‑2:2019/A1:2021 •ENIEC 61000‑3‑11:2019
In accordance with the Directive 2000/14/EC relating to noise emission, the fol-
lowing is confirmed: Sound power level (L
WA
)
–Measured: 94.0dB;
–Guaranteed: 96dB
Followed conformity assessment procedure according to 2000/14/EC, AnnexV.
This declaration of conformity is issued under the sole responsibility of the
manufacturer:
Grizzly Tools GmbH & Co. KG
Stockstädter Str. 20
63762 Großostheim
GERMANY
02.12.2024
Christian Frank
Authorised representative of docu-
mentation