39
these instructions carried out by our
Service Centre. Only use original re-
placement parts.
Cleaning
NOTICE! Risk of damage! Improp-
er cleaning can damage the device.
Never spray down the device with
water. Do not clean the device under
running water. Do not use any abras-
ive cleaning agents or solvents.
Always keep the device clean.
Cleaning after operation
1. Move the On/Off switch (4) to the
position “0” (OFF).
2. Pull out the plug.
3. Keep the ventilation slits clean and
free of objects.
4. Clean the device with a soft brush
or a slightly damp cloth.
Cleaning the standard vario-nozzle
In rare cases, the standard vario-
nozzle may become clogged by for-
eign bodies.
1. Remove the standard vario-nozzle
(22).
2. Remove the foreign body from
the front using the nozzle cleaning
needle (5).
3. Rinse the standard vario-nozzle
with water from the front to re-
move the foreign body.
Cleaning the filter insert in the wa-
ter connection
1. Remove the coupling (19) from the
water connection (21).
2. Remove the filter insert (20) from
the water connection.
3. Clean the filter insert under run-
ning water.
4. Fit the filter insert (20) and coup-
ling (19) in reverse order.
Maintenance
The device is maintenance free.
Storage
Notes
Always store the device and ac-
cessories:
• clean
• dry
• protected against dust
• protected against frost
• out of the reach of children
Preparing the device for storage
NOTICE! The pressure washer and
accessories will be destroyed by frost
if they are not completely emptied of
water.
1. Completely empty the water from
the device.
• Disconnect the device from the
water supply.
• Turn on the pressure washer
with the On/Off switch (4) for a
maximum of 1 minute.
• Press the switch lever (24) on
the trigger gun (6) until there is
no more water coming out of
the trigger gun (6) or the attach-
ments.
• Turn off the device.
2. Completely empty the water from
the accessories.
3. Store all attachments upright in the
holders with the connection facing
downwards.
4. Roll the high-pressure hose
around the hose reel (12).
5. Store the mains connection cable
in the holder (14) provided.
To Next Page
Loading...
