46
GB MT
when you strike the grinding disc with
a plastic hammer, it results in a clear
too small for the cutting/grinding disc to
make it larger.
ters in order to make cutting/grinding
the grinding tools.
replacing the tool.
from cuts.
breaking the washer and nut.
Inserting/removing the
rechargeable battery
hear it click into place.
the battery and pull the battery out.
Checking the charge level of
the rechargeable battery
LED lights on the charge level
indicator:
Red-amber-green => battery fully charged
Red-amber => battery approx. half charged
Red => battery needs to be charged
Checking the charge status on the
tool:
during operation.
Checking the charge status on the
battery:
the battery.
indicator on the battery.
Charging the battery
If warm, allow the battery to cool be
fore charging.
Charge the battery (17
(17
from the tool.
2. Slide the battery (17 into the charging
slot of the charger (18.
3. Plug the charger (18 into a power out
let.
4. Once charging is complete, disconnect
To Next Page
Loading...
