24
© 2014 - 2024 Parktron Technology Ltd.
Step 3: Discharge coins - Coins will be discharged from different hopper by the order on
the page screen listed, and there will be 1~2 seconds stop between each hopper
discharging to allow changing coin collecting box for different denomination.
Step 4: After coin discharging completed, the APS system automatically print out an
account settlement receipt from the device’s thermal printer (item c in Figure 2).
Step 5: Collect bill(s) – After settlement receipt(s) printed, manually unlock with the key
and pull out the bill validator security box (item e in Figure 2); detach the bill cassette
from bill validator and APS system automatically print out a bill settlement receipt from
the thermal printer; And then remove/collect bill(s) from the bill cassette; Liquidate
collected bill(s) with the bill settlement receipt.
Step 6: Push [Close] button to quit out of revenue settlement page and go back to
maintenance page (3).
Note：Daily settlement gets only one(1) settlement receipt printed, and Full
settlement gets two(2) identical copies of settlement receipt printed.
Note：Do NOT remove bill cassette before Step 4 settlement receipt printing or Step 3
coin discharge or the Full or Daily settlement receipt will have its bill data
listed all 0.
To Next Page
Loading...