Parrot Asteroid Classic User Manual

27Internet
4. Select your APN (Access Point Name) from the suggested list. This information
is available in the documentation provided with your 3G key. If your APN is not
in the list, you can add it by selecting Settings > Network > 3G Key >
Configuration > New access point.
> The message "3G key configured" appears.
5. Wait approximately 30 seconds until the connection is established. You can
also press the button and browse the menus while the connection is being
established.
Connection via Bluetooth
If you have a telephone that supports the Bluetooth profile, DUN (Dial-Up
Networking) or PAN (Personal Area Network), the Bluetooth connecting your
telephone to the Parrot ASTEROID Classic will allow for sharing of the telephone's
3G connection.
1. Connect your telephone to the Parrot ASTEROID Classic via Bluetooth .
2. On the Parrot ASTEROID Classic, select Settings > Network > Bluetooth >
Configuration.
3. Select your APN (Access Point Name) from the suggested list, then check
Select .
4. Press the button and select Connect.
5. Allow connection sharing on your telephone. This procedure will vary according
to your telephone model. Please refer to the compatibility page of the Parrot
ASTEROID Classic for more information.
Connexion via USB
If your phone supports 3G connection sharing via USB, connect your phone to the
Parrot ASTEROID Classic using the USB cable/micro-USB provided with your
phone.

Parrot Asteroid Classic Specifications

General

MP3 playback	Yes
CD-R playback	No
Supported radio bands	AM
Preset stations quantity	6
Output power	55 W
RDS features	PS, PTY, RT, TP
Product color	Black
Equalizer bands quantity	7
Display type	TFT
Display diagonal	3.2 \
Display number of colors	262144 colors
Compatible memory cards	SD
Bluetooth version	2.1+EDR
Bluetooth profiles	A2DP, AVRCP, HFP, HSP, OPP, SPP
USB ports quantity	4
Security features	Removable front