Parrot Asteroid Classic User Manual

36
Settings
Display
Adjusting brightness
1. Select Settings > Display > Brightness.
2. Use the knob to adjust the screen brightness.
3. Push the knob to confirm.
4. Use the knob to adjust the facade brightness.
5. Push the knob to confirm.
Switching from day / night mode
The day / night mode adapts the screen brightness to exterior brightness conditions.
To switch from day / night mode, select Settings > Display > Night mode.
Note: You can also push the knob for 2 seconds to switch from day / night mode.
Troubleshooting
Before you begin
Make sure the “Goodbye” message is displayed on the Parrot ASTEROID Classic
screen when you turn the ignition off. Refer to the Checking the wiring section for
more information.
Reset the Parrot ASTEROID Classic. To do so, remove the faceplate then use a
paper clip to press the Reset button. Hold down the Reset button for 3 seconds.
Make sure you have the latest software update on your Parrot ASTEROID Classic.
To do so, select Settings > About > Version. Compare this number with the one on
our website, Downloads section.

Parrot Asteroid Classic Specifications

General

MP3 playback	Yes
CD-R playback	No
Supported radio bands	AM
Preset stations quantity	6
Output power	55 W
RDS features	PS, PTY, RT, TP
Product color	Black
Equalizer bands quantity	7
Display type	TFT
Display diagonal	3.2 \
Display number of colors	262144 colors
Compatible memory cards	SD
Bluetooth version	2.1+EDR
Bluetooth profiles	A2DP, AVRCP, HFP, HSP, OPP, SPP
USB ports quantity	4
Security features	Removable front