Compare the Parrot ASTEROID Classic antenna connector to the antenna
connector of your vehicle. If an adapter is necessary, contact your local car audio
specialist. Make sure you also supply power to your antenna if it is amplified. Power
to the antenna can be supplied using the Parrot ASTEROID Classic ISO cable.
Installing the car stereo
1. Insert the cage and fix it into the dashboard using the bracket mounting tab.
2. Pull audio and power cables of the vehicle to the outside of the dashboard,
through the mounting bracket.
3. Connect the audio and power connectors of the Parrot ASTEROID Classic to the
ones of your vehicle.
4. Check the wiring (as explained in the
Final check
section).
5. Install the audio cables (as explained in the
Installing the cables
section).
6. Install the double microphone (as explained in the
Installing the microphone
section)
7. Slide the car stereo into the Parrot ASTEROID Classic cage and install the
faceplate.
To Next Page
Loading...
