13Getting started
1. Select Settings > Telephony > Paired devices.
2. Select the phone you want to define as Preferred.
3. Check the Preferred phone option.
Disconnecting a phone
1. Select Settings > Telephony > Paired devices.
2. Select the phone you want to disconnect from the Parrot ASTEROID Classic.
3. Select Disconnect.
Deleting a phone from the paired devices list
1. Select Settings > Telephony > Paired devices.
2. Select the phone you want to delete.
3. Select Delete.
Managing the "Memory full" problem
You can pair up to 10 devices with the Parrot ASTEROID Classic. If you attempt to
pair an 11th phone, you will get the « Memory full » message. You must then delete
a phone from the paired devices list. To do so:
1. Select Settings > Telephony > Paired devices.
2. Select the phone then select Delete.
Note: The problem of full memory may also be related to an installation problem:
inversion of ignition 12V and permanent 12V or absence of after-contact 12V.
Connecting two phones
To activate Dual Mode (multipoint) and connect two phones :
1. Tap Settings > Bluetooth.
2. Activate the Dual Mode option.
When the Parrot ASTEROID Classic is switched on, it attempts to connect to all paired
phones in the vehicle. If there are more than two paired phones in the vehicle, the
device connects to the two phones with the oldest pairing.