Parrot ASTEROID - Page 12

12
Getting started
- If the phone asks you to enter the Bluetooth PIN code, enter “0000”.
- If the Parrot ASTEROID and your telephone display two codes, verify that
the codes are identical, then either confirm or invalidate.
> The Parrot ASTEROID screen will display “Pairing successful”.
Note: Pairing procedures for the most common phones are available on the
compatibility section of our website.
Automatic connection
Once your telephone is paired with the Parrot ASTEROID, the 2 devices will
automatically connect when they are turned on and in proximity of each other.
Note: Depending on the model of your phone, you may have to authorize the
connection to the Parrot ASTEROID to allow the automatic connection.Refer
to your phone user guide for more information.
Defining a phone as preferred phone
The phone which you will define as Preferred is the one whose connection with the
Parrot ASTEROID will take priority. This option may be useful if several phones paired
with the Parrot ASTEROID are simultaneously in the vehicle. To define a phone as
preferred :
1.
Select Settings > Telephony > Paired devices.
2.
Select the phone you want to define as Preferred.
3.
Check the Preferred phone option.
Disconnecting a phone
1.
Select Settings > Telephony > Paired devices.
2.
Select the phone you want to disconnect from the Parrot ASTEROID.
3.
Select Disconnect.
Deleting a phone from the paired devices list
1.
Select Settings > Telephony > Paired devices.
2.
Select the phone you want to delete.