13Getting started
3.
Select Delete.
Managing the "Memory full" problem
You can pair up to 10 devices with the Parrot ASTEROID. If you attempt to pair an
11th phone, you will get the « Memory full » message. You must then delete a
phone from the paired devices list. To do so:
1.
Select Settings > Telephony > Paired devices.
2.
Select the phone then select Delete.
Note: The problem of full memory may also be related to an installation
problem: inversion of ignition 12V and permanent 12V or absence of after-
contact 12V.
Synchronising the phonebook
Automatic synchronisation
With most of the Bluetooth phones, the phonebook is automatically synchronized in
the system’s memory.
Warning: Only the contacts stored in the phone memory are synchronized. If your
contacts are stored in your SIM card memory, transfer them onto your phone
memory.
The automatic synchronization is limited to 2000 contacts for each paired phone
and to 8000 contacts for all paired phones.
Each time you change your directory, synchronisation will start automatically the
next time it is connected.
Disabling automatic synchronisation
If you have too many contacts in your phonebook, you have the possibility to
choose the contacts you want to send. To do so, you must disable the automatic
synchronisation in order to send the selected contacts via Bluetooth manually. To
do so:
1.
Delete your phone from the paired devices list. Refer to the Deleting a phone
from the paired devices list section for more information.