Parsun F40 BW-T-EFI User Manual

55
1.Start-in-gear protection cable
3. Remove the starter cover after removing the three bolts.
Disconnect the leads for the warning indicator
4. Prepare the engine for starting. For further information, see section 2.5.
5. Insert the knotted end of the emergency starter rope into the notch in the flywheel rotor and wind the
rope several turns around the flywheel clockwise.
6. Pull the rope slowly until resistance is felt.
1

Parsun F40 BW-T-EFI Specifications

General

Brand	Parsun
Model	F40 BW-T-EFI
Category	Outboard Motor
Language	English