2. Attach the engine stop switch lanyard to a secure place on your clothing, or your arm or leg. Then
install the lock plate on the other end of the lanyard into the engine stop switch.
WARNING:
Attach the engine stop switch lanyard to a secure place on your clothing, or your arm or leg.
Do not attach the lanyard to clothing that could tear loose. Do not route the lanyard where it
could become entangled and preventing it from functioning.
Avoid accidentally pulling the lanyard during normal
operation. Loss of engine power means the loss of
steering control. Also, without engine power, the
boat could slow rapidly. This could cause people
and objects in the boat to be thrown forward.
3. Turn the main switch to “ON” (on).
4. Open the throttle slightly without shifting using
the neutral throttle lever or free accelerator.
You may need to change the throttle opening
slightly depending on engine temperature. After
The engine starts, return the throttle to the original
position.
NOTE:
On remote controls equipped with a neutral throttle lever, a good starting point is to lift the
lever just until you feel resistance, then lift slightly more.
The neutral throttle lever or free accelerator can only be used when the remote control lever
is in neutral
20
To Next Page
Loading...
Need help?
General
