MPS Version Control For OS
This eld allows you to select the MPS (Multi-Processor Specication) version to match the operating
system. To nd out which version to use, consult the vendor of your operating system. The default setting is
1.4.
OS Select For DRAM > 64 MB
This item is only required if you have installed more than 64 MB of memory and you are running the OS/2
operating system. Otherwise, leave this item at the default. The default setting is Non-OS2.
Full Screen LOGO Show
This item enables you to show the full screen logo on the bootup screen. The default setting is Disabled.
Small Logo(EPA) Show
This item enables you to show the company logo on the bootup screen. The default setting is Enabled.
To Next Page
Loading...
