Partner PT-6200 - Power Management Setup

26 CHAPTER 2 BIOS SETUP
Power Management Setup
Use these items to control system power management. Modern operating systems take care of much of the
power management. This mainboard supports ACPI (Advanced Conguration and Power Interface).
ACPI Function
This mainboard supports ACPI (Advanced Conguration and Power management Interface). Use this item to
enable or disable the ACPI feature. The default setting is Enabled.
NOTE
ACPI is a power management specication that makes hardware status
information available to the operating system. ACPI enables a PC to
turn its peripherals on and off for improved power management. It also
allows the PC to be turned on and off by external devices, so that mouse
or keyboard activity wakes up the machine.
Power Figure 2.10
Management Setup menu
ACPI Suspend Type
Use this item to dene how the system suspends. In the default, S1(POS), the suspend mode is equivalent to a
software power down. If you select S3(STR), the suspend mode is a suspend to RAM - the system shuts down
with the exception of a refresh current to the system memory. The default setting is S1(POS).
Power Management
This item acts like a master switch f or the power-saving modes and hard disk timeouts. If this item is set to
Max Saving, power-saving modes occur after a short timeout. If this item is set to Min Saving, power-saving
modes occur after a longer timeout. If the item is set to User Dene, you can dene timeouts for the power-
saving modes. The default setting is User Dene.
Video Off Method
This item denes how the video is powered down to save power. The default setting is DPMS.
Video Off In Suspend
This option denes if the video is powered down when the system is put into suspend mode. The default
setting is Yes.
Suspend Type
If this item is set to the default Stop Grant, the CPU will go into Idle Mode during power saving mode.
Suspend Mode
The CPU clock will be stopped and the video signal will be suspended if no Power Management events occur
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
ACPI Function [Enabled]
ACPI Suspend Type [S1(POS)]
Run VGABIOS if S3 Resume Auto x
Power Management [User Dene]
Video Off Method [DPMS]
Video Off In Suspend [Yes]
Suspend Type [Stop Grant]
Suspend Mode [Disabled]
HDD Power Down [Disabled]
Soft-Off by PWR-BTN [Instant-Off]
CPU THRM-Throttling [50.0%]
Resume by Alarm [Disabled]
Date(or Month) Alarm 0 x
Time(hh:mm:ss) Alarm 0 : 0 : 0 x
Item Help
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults