Frequency/Voltage Control
Use these items to control system frequency and voltage.
PC Health Figure 2.14
Status menu
Auto Detect PCI Clk
This item is used to auto detect the PCI slots. When set to Enabled, the system will remove (turn off) clocks
from empty PCI slots to minimize the electromagnetic interference (EMI). The default setting is Enabled.
Spread Spectrum
When the motherboard clock generator pulses, the extreme values (spikes) of the pulses creates EMI
(Electromagnetic Interference). The Spread Spectrum function reduces the EMI generated by modulating the
pulses so that the spikes of the pulses are reduced to atter curves. If you do not have any EMI problem, leave
the s etting at Disabled for optimal system stability and performance. The default setting is Enabled.
Phoenix - AwardBIOS CMOS Setup Utility
Frequency/Voltage Control
Auto Detect PCI Clk [Enabled]
Spread Spectrum [Enabled]
Item Help
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
To Next Page
Loading...
